You are currently browsing the tag archive for the ‘computer hardware’ tag.
DDR4 is the new standard in system memory. DDR2 and DDR3 are stories of past, I know there are systems still around with DDR3 and few of them with DDR2 memory but if you are going to build a new system you won’t be picking up anything but DDR4 RAMs.
Before we get our hands on some nice DDR4 RAMs we should first make sure that we have a DDR4 compatible Motherboard. Intel’s X99 Chipset codenamed “Wellsburg” was Intel’s first Chipset to feature DDR4 memory supporting LGA 2011-v3 Socket, Intel has now released 100 Series Chipset family codenamed “Sunrise Point” which will use a new Socket type LGA 1151, this family brings with it seven Chipsets; H110, B150, Q150, H170, Q170 and Z170 being the head of the family, Z170 is packed with power and performance for PC enthusiast, Hard Core Gamers and Content Creators, especially it’s 20 PCI-E 3.0 Lanes which makes it stand out of the crowd, if you don’t have a DDR4 motherboard Buy One From Here!
We need to consider few things before we make our purchase, we should make use of the Dual Channel or Quad Channel memory configuration or whatever your motherboard features, so buy RAMs in 2, 3 and 4 Sticks pair and install them in matching banks or if you want to fill all the RAM slots in your Motherboard then make purchases in 4, 6 and 8 Sticks pair.
Also, buy at least 8GB capacity of RAM whether you are gaming, video editing or multitasking, a minimum of 8GB RAM is recommended, you can either install single 8GB stick or you can install two 8GB sticks to run Dual Channel Configuration.
Although there are many DDR4 kits available in market we recommend few of these options for you.
Note: Please remember that prices mentioned below are offered at the time of writing this article and may fluctuate over time.
Kingston HyperX FURY Black 8GB 2133MHz DDR4 Non-ECC CL14 – Single RAM Stick! $35.08 & FREE Shipping on orders over $49.
Kingston HyperX FURY Black 8GB Kit (2x4GB) 2133MHz DDR4 Non-ECC CL14! $40.89 & FREE Shipping on orders over $49.
Kingston HyperX FURY Black 16GB Kit (2x8GB) 2133MHz DDR4 Non-ECC CL14! $69.69 & FREE Shipping.
Kingston HyperX FURY Black 16GB Kit (4x4GB) 2400MHz DDR4 Non-ECC CL15! $93.84 & FREE Shipping.
DDR3 RAM has become a lot more better in value than it was few months back. Now this is the right time to get a pair or two of DDR3 memory for your system specially since DDR2 price has gone up and close to DDR3 prices.
DDR3(Double Data Rate 3) is a newer, faster and most advanced technology in system RAM but…… yes there is a but, DDR3 is not always faster than DDR2, specially when it’s lower in speed, lets say you have DDR2 running at 1066MHz and DDR3 running at same 1066MHz speed results will be very disappointing from DDR3 prospective.
Because at 1066MHz speed DDR3 RAM will run at cas 9 timings whereas DDR2 at same speed will be running at cas 5 timings and you just can’t run DDR3 at 1066MHz with cas 5 timings and if somehow you succeed in running DDR3 1066MHz at cas-5 timing you will have stability issues.
Bandwidth And Latency Times!
To give you better understanding of what is bandwidth and what is latency timing here is a short note:
1. This is the SPEED at which memory works, higher bandwidth means faster data transfer.
2. A 1066MHz speed memory goes faster through clock cycles than 800MHz speed.
Cas Latency (tCL):
What is Cas Latency? it’s very simple to understand it:
1. This is the TIME (in clock cycles) it takes between arrival of request for the data and it being delivered, for example you wait if you RAM is CAS 2 it will take 2 clock cycles to perfom the task.
2. The request is sent from the memory controller to the memory module.
I am sure that now you have the understanding of how memory works, higher bandwidth memory works faster but higher latency times takes longer to fetch data, so it will make a 1066MHz DDR3 look no faster and in some cases even slower than a DDR2 800MHz, that’s why you see memories with lower latency times priced higher than same speeded memories with higher latency times.
DDR3 is power efficient than DDR2, DDR3 at higher bandwidth performs faster than DDR2 and consumes less power than DDR2. DDR3 requires 1.5V to properly run whereas DDR2 has the voltage requirement of 1.8V.
DDR2/DDR3 Hybrid Boards!
If you are one of those lucky ones who have a DDR2/DDR3 hybrid board, a board that has both DDR2 and DDR3 slots and you want to upgrade your RAM you better stick with DDR3 instead of DDR2, the only reason I can give you is the price at the moment, these days price is playing a big role in memory. If you already have DDR2 RAM then sell them and upgrade by getting a pair of DDR3 RAM.
Consider these DDR3 RAMs seen on this page!
Faster Speed DDR3 Memory!
By faster speed I mean higher bandwidth memory.
When buying system memory it makes sense when you pay just 20 to 30 dollars more to get a 4GB kit of higher speed DDR3 RAM than a 4GB kit of DDR2 running at 1066MHz. Always go for a faster pair of DDR3 memory because a DDR3 at speed of 1066MHz with timings set at 9-9-9-18 will perform worse than a set of DDR2 running at same 1066MHz speed with 5-5-5-15 timings.
Slower latencies is the only reason to avoid lower speed DDR3, price used to play an important role but not anymore because today almost all RAM companies has increased DDR3 production which result in decreased prices for DDR3 RAM and increased prices for DDR2 RAM, but the biggest draw back is slower latencies.
So I suggest you to stay away from entry level DDR3, entry level DDR3 doesn’t perform on par with high level DDR2 and you can’t compare entry level DDR3 with enthusiast level DDR2 because the performance difference will be too much just because of latency timings.
The downside of DDR2 is bandwidth and upside is latency timings, whereas the downside of DDR3 memory is timings and upside is bandwidth, so if you go for DDR3 make sure it’s higher bandwidth DDR3 to be on safe side.
So before you invest into very high priced DDR2 think twice. If you are building a totally new rig I will highly recommend you to go with DDR3 system. There isn’t much difference in a kit of 4GB DDR2 and DDR3 RAMs. You can even find 4GB kit of some enthusiast level DDR3 RAMs running at 1800MHz speed for the same price of DDR2 4GB kit running at 1200MHz speed or lower 1066MHz speed. Make sure you keep these points in mind before you upgrade your system memory.
So don’t be a fool and invest wisely.
There are few things worth noting about this laptop:
The first thing that you will notice about this lappy is it’s design, this is the thinnest and lightest Toshiba Satellite model yet. It’s thin and sleek design will do it’s magic, it’s beautiful design will amaze you and your friends and family. Though it’s ultra thin design it features a full-sized 85-keys keyboard and full-sized touchpad with multi-touch capabilities for hassle free operation.
Low Power Processor And Long Life Battery:
Toshiba Satellite T135-S1307 is powered by a dual-core Ultra Low Voltage (ULV) Intel Pentium SU4100 processor for advanced energy efficiency, this processor consumes just a mere 10-watts, it’s ultra-low voltage consumption result in greater battery life. Though it’s a low voltage processor it’s powerful enough to perform all your video and audio editing, DVD ripping and other tasks at a blazing fast speed, thanks to it’s fast 800MHz FSB (Front Side Bus) and 2MB L2 cache. The best thing about this laptop is it’s battery, it has Li-Ion 5600mAh 6-Cell battery with life up to 9.37 hours.
Though it’s MSRP (Manufacturer Suggested Retail Price) is $699.99 you can purchase it for a reduced price of $599.99 with FREE shipping by Clicking this link, you will save a whopping $100, that’s 14% off.
Toshiba Satellite T135-S1307 come packed with a whopping 500GB Serial-ATA hard drive spinning at 5400RPM with with an impact sensor that will protect your data by “parking” the hard drive heads in the event of a drop or sudden movement.
It has built-in Intel Graphics Media Accelerator 4500M, it’s a DirectX 10 gpu, since it has no dedicated graphics memory it will share memory with system RAM from 128MB to all the way up to 1340MB.
A total of 3GB DDR3 memory running at 1066MHz is installed in this system.
It has a TFT 13.3″ widescreen display screen with resolution of 1366×768 pixels (native 720p for high-definition viewing) with HD TruBrite LED Backlit technology which makes it possible to render superb colorful photos and videos.
It comes with one RGB (Monitor) Port, one HDMI Out Port, USB Sleep and Charge Port (2.0), one Headphone Jack, One Microphone Jack, two USB ports (2.0) and one 10/100 Network/LAN Port. Also this system has Draft-N Wi-Fi networking (802.11b/g/n) for greater speed and range and equipped with Bluetooth connectivity (version 2.1 + EDR) with embedded A2DP profile. There total of nine system indicator lights on the front of laptop.
It comes installed with Genuine Windows 7 Home Premium (32-bit) OS (operating system).
Get Thinnest Laptop Toshiba Satellite T135-S1307 At Discount Rate!
Difference Between Radeon HD 4890 (RV790) And Radeon HD 4870 (RV770):
RV790 is nothing of an advancement in technology rather an advancement in RV770 graphics processor. RV770 and RV790 looks similar, but they are not identical, RV790 comes with a different layout of the die and the pin count is also not compatible with RV770 boards.
Beside higher clock speed ATI’s RV790 has improved shader efficiency, which will help RV790 to perform a bit faster than it’s predecessor RV770 even at the same clock and specification. ATI actually done something good with the shaders of RV790 to improve overall performance of the graphics processor. Higher clocks will require more power and 6+8 pin power connectors present in HD 4890 instead of 6+6 ones of HD 4870 is a sign of that.
Radeon HD 4890 Specifications:
So far the specifications that have leaked for this card are here:
HD 4890 has core clock speed of 850MHz, 256-bit wide memory interface, 1GB GDDR5 memory which is clocked at 975 MHz (effective 3900MHz Quad pumped), with memory bandwidth of 124.8GB/s up from the 111GB/s of its predecessor, the HD 4870. It has 800 stream processors, fabricated at 55nm, supports DirectX 10.1, SM4.1 and is CrossFireX ready.
These are reference clocks and we can expect even higher clocks with overclocked versions from ATI partners.
Radeon HD 4890 Price:
Rumors are this card will cost US $249.
Radeon HD 4890 Availability:
ATI is said to launch it’s upcoming video card Radeon HD 4890 on Thursday, April 9th.
Catalyst Control Center
View of Catalyst Control Center with Radeon HD 4890 installed.
ATI reference design Radeon HD 4890:
While we are at this topic I should show you guys the upcoming Radeon HD 4890, it’s from ATI and it’s reference design, but we can expect some custom designed HD 4890 video cards after it’s official launch.
Radeon HD 4890 from PowerColor and Gigabyte in these pictures:
ATI Vs Nvidia!
ATI, the graphics division of AMD is working full force to win the battle which is going on between them and Nvidia, I know that right now Nvidia is the king when it comes to high-end graphics cards, their single gpu GeForce GTX 285 and dual gpu GeForce GTX 295 are unbeatable but ATI is taking the lead in mid-range cards with price vs performance ratio.
ATI, after cutting prices for their Radeon HD 4800 series has become very competitive for Nvidia in mainstream level.
Nvidia GeForce GTS 250 VS ATI Radeon HD 4870!
ATI Radeon HD 4870 is a performance mainstream video card that performs close to and in some games neck-to-neck with Nvidia’s GeForce GTX 260 (216 Core) video card and Nvidia’s GeForce GTX 260 (216 Core) graphics card is available for around $240.00 whereas ATI’s Radeon HD 4870 card sells for around $210.00, so, price/performance ratio wise ATI wins here.
Nvidia recently launched GeForce GTS 250 video card and Radeon HD 4850 video card which sells for around $150.00 is the main competitor of GeForce GTS 250. Benchmarks seen over at internet shows that GeForce GTS 250 takes the lead in most of the games over Radeon HD 4850 and GeForce 9800 GTX+.
If you will compare GeForce GTS 250 to Radeon HD 4870, GeForce GTS 250 will left behind by Radeon HD 4870 in almost all of the games, so, I don’t think there is any point in comparing GTS 250 with HD 4870.
This battle which is going on between ATI and Nvidia is not going to over here because when one company take some action the other one does something in it’s reaction, so, expect more to come your way, it’s good for you. 🙂
GTS 250 Price And Availability:
At the moment there are only three GeForce GTS 250’s are available and most of them are available for pre-order, from three available cards one is from XFX which is a 512MB version with stock clocks for $149.99 and the other one is from Gigabyte for $179.95 which is a 1GB version with Zalman cooling fan installed on it and there is also a 512MB overclocked version from BFG available for $169.99.
These GeForce GTS 250 video cards are based on 55nm G92b, featuring 128 stream processors, these card require only one 6pin power supply connector.
XFX GeForce GTS 250 GS-250X-YDFC
Bus Type: PCI-E 2.0
GPU Clock: 738 MHz
Memory Bus: 256Bit
Memory Type: DDR3
Memory Size: 512MB
Memory Speed: 2200 MHz
Shader Clock: 1836MHz
Gigabyte GeForce GTS 250 GV-N250ZL-1GI
Bus Type: PCI-E 2.0
GPU Clock: 740 MHz
Memory Bus: 256-Bit
Memory Type: DDR3
Memory Size: 1GB
Memory Speed: 2000 MHz
Shader Clock: 1850MHz
This card from Gigabyte is cooled by a Zalman OEM VF1050 cooler with copper fins and 4 heatpipes.
BFG GeForce GTS 250 OC
Bus Type: PCI-E 2.0
GPU Clock: 750MHz
Memory Bus: 256-Bit
Memory Type: DDR3
Memory Size: 512MB
Memory Speed: 2240MHz
Shader Clock: 1863MHz
So, you wanna build a pc that won’t cost you an arm and a leg? a pc that do the killing in performance but not to your pocket? something that smoothly runs 3D applications and plays pc games at playable framerates? then don’t worry I’ll help you in your quest.
Goal for building this rig!
My main goal for building this rig is to buy the cheapest computer hardware components possible and not just the cheapest ones but something that is of good quality, something that is cheap but doesn’t lag in gaming or something that at least play our favorite games at playable framerates.
Next step is I gonna give you my suggestions of which computer parts you should pick.
Motherboard (Gigabyte GA-P31-ES3G)!
GA-P31-ES3G CPU support: Multi core 45nm CPUs at 1600MHz FSB.
Memory support: 2 Dimm slots that supports two 240-pins DDR2 DIMMs at speeds of 1066MHz, 800MHz and 667MHz, in dual channel configuration with a maximum capacity of 4GB memory.
Expansion slots: One PCI-Express x16 slot, three PCI-Express x1 Slots and three PCI Slots.
Storage: One IDE ATA-100 channel, four SATA-2 Ports.
Audio: 5.1-Channel HD audio with one S/PDIF output.
Back panel: One Gigabit Ethernet Controller, four 2.0 USB ports, one Serial and one parallel Port.
It comes with premium quality Capacitors and Ferrite Core Choke for CPU VRM (voltage regulator module) and has dual bios onboard that automatically retrieves BIOS data when primary BIOS has crashed or failed.
This motherboard doesn’t have two PCI-Express x16 slot but again we are building a budget gaming pc so this is out of question.
Gigabyte GA-P31-ES3G Motherboard, BUY NOW!
Processor (Intel Pentium Dual-Core E5200)!
E5200 is a dual core cpu from Intel’s Pentium series, codename Wolfdale-2M, clock speed is 2.5GHz with a FSB(Front Side Bus) of 800MHz and L2 cache of 2MB.
Intel Extended Memory 64 Technology (EM64T)
Enhanced Intel Speedstep Technology
Enhanced Halt State (C1E-8w)
Extended Stop Grant State (C2E)
Intel Thermal Monitor 2
This processor is fabricated at 45nm technology process. It’s a socket 775 cpu with a max TDP (Thermal Design Power) of 65Watts. With a TDP of 65Watts and 45nm fabrication process this processor is a nice overclocker for sure.
Intel Pentium Dual-Core E5200 CPU, BUY One TODAY!
RAM (OCZ OCZ2G8002GK)!
For ram I choose OCZ PC2-6400 Gold Gamer eXtreme edition, this memory runs at 800MHz speed with cas latency of 5-5-5-15 (CAS-TRCD-TRP-TRAS). It has Gold Layered XTC (Xtreme Thermal Convection) Heatspreader for improved heat dissipation which helps this memory run cooler and deliver the maximum performance while you are gaming.
Video Card (SPARKLE 9600GT)!
Graphics card is from Sparkle, model number is SF-PX96GT512D3-HP. Video card is one of the most important part of any gaming pc. This is the cheapest I could find, at $74.99 I think it’s a steal deal, so, hurry up before it’s out of stock. 9600GT is a powerful video card, powerful enough to run most of your games at higher framerates and in some games it will even give you incredible results.
Core clock is 650MHz, it has 512MB GDDR3 memory which runs at 1800MHz, 256-Bit memory interface and shader clocks are set to 1625MHz.
SPARKLE 9600GT Video Card, BUY IT NOW!
Hard Disk (Western Digital 500GB SATA2)!
A 500GB hard disk drive from Western Digital, this drive should be sufficient for your cheap gaming rig. this drive is SATA 3Gb/s (A.K.A SATA II) Interface, it comes with 16MB of Cache, spins at fast speed of 7200RPM. It’s a 3.5″ internal hard disk from Western Digital’s Caviar SE16 series, Model number for this drive is WD5000AAKS.
Optical Drive (LG 22X DVD Rewriter)!
Here is a nice and cheap DVD Rewriter from LG for your cheap build gaming pc.
Maximum DVD writing speed for this drive is 22X and maximum writing speed for CD is 48X, this drive comes with 2MB of cache and it has SATA interface and it’s 5.25″ of size. It also comes with LightScribe feature which is a cost effective way of labeling discs from your PC, it will not label any disc that you would put in your DVD-RW it will only label special LightScribe discs.
Model number of this DVD Burner is GH22LS30.
LG 22X DVD Rewriter, BUY NOW!
I am listing more item here incase you don’t have these items and to me these item are additional because I assume you already have these item from an older rig or you brought one or two from your friend.
If I am buying a computer case I will look for few things in it, first is cooling system by cooling system I mean there should be about three fans in computer case, one in the front, one in the rear and one on the side panel, second is tool free design for the ease of installation, last but not least a front panel and if it has looks that’s a plus point for me.
Cooler Master Centurion 5!
This ATX Mid Tower case is good choice because it’s from Cooler Master 😀 NO that was just a joke, it’s a nice case because it has one 120mm rear fan and one 80mm front fan with side panel ventilation, it’s nice because it is tool free design so you don’t need to screw your drives or expansion cards you just secure them in the place with clips instead of screws.
For your ease this case comes with front panel that consists of two USB ports, Headphone and Microphone jacks, and one Fire Wire(IEEE 1394) port. It’s all good no doubt.
Cooler Master Centurion 5 ATX Case, BUY NOW!
CPU Cooler (Cooler Master Hyper TX2)!
Checkout this cpu cooler from Cooler Master it’s called Hyper TX2, it’s light weight (only 482 grams), cheaper yet quite effective when it comes to keeping your cpu cool. It has three heatpipes, these three heatpipes are made of copper as well as the base of this cpu cooler. Fins of this cpu cooler are made of Aluminum which disperse the heat very effectively that comes from it’s 3 copper made heatpipes.
CPU Cooler Fan!
It’s fan size is 92mm which runs at speed of 1800RPM to deliver over 41CFM, do not worry about the noise, it’s a quiet fan, it’s noise level is only 22dBA which you won’t hear spinning while you work on your pc.
You can use this cpu cooler with these CPUs: AMD Socket 754, 939, 940, AM2 and Intel LGA 775.
Cooler Master Hyper TX2 CPU Cooler, BUY It NOW!
Power Supply (Thermaltake Purepower W0100RU)!
Since this is not a power hungry rig you don’t need to add a power supply, the power supply that comes with your computer case should be able to provide your system enough juice to run smoothly but still if you insist on one here is my recommendation.
Thermaltake is a big name when it comes to power supplies and computer cases, for this cheap gaming rig I suggest you to go with Thermaltake Purepower W0100RU power supply which is a 500watts psu. It has enough power and enough connectors to run your new gaming system without any problems. It comes with a switch to select 115-Volts or 230-Volts. This power supply complies with ATX 12V 2.0 Version.
This power supply comes with two +12Volt rails with one rated at 14A and one rated at 15A, so, +12V rail of this psu delivers a total of 29Amperage and a 9600 GT video card needs at least 26 Amperes on the 12V rail to run.
Power Supply Connectors:
1x 24-pin Main Power Connector
1x 4-pin 12V Power Connector
8x 4-pin Molex Connectors
4x 5-pin SATA Connectors
1x 6-pin PCI-Express Connector
2x 4-pin Floppy Drive Connectors
Power Supply Fan!
This power supply comes with a 120x120x25mm size fan which runs at maximum speed of 2400RPM, this fan automatically adjust it’s speed according to the temperature of the power supply, it would run at 1525 rpm if temps are at 28.6°C and if temps raises it will speed up further to keep the power supply cool, with a noise level of 19dBA at 2000RPM you won’t even notice it running in your system, so, don’t worry about the noise level of this fan.
Thermaltake Purepower 500Watts Power Supply, BUY NOW!
Keyboard (Microsoft Digital Media Pro)!
This keyboard is sleek and stylish in design, it has 105 standard keys with 22 media key with 1 Zoom Slider on the left of keyboard. You can connect this keyboard to your computer either with a USB or a PS/2 port, this keyboard comes with USB To PS/2 Adapter so if you are using a PS/2 port you can utilize these adapters. This keyboard is Windows Vista certified.
Mouse (Logitech LX7 Cordless Optical Mouse)!
Logitech LX7 Cordless Optical Mouse in Dark Blue color, this mouse is wireless and runs with two AA size batteries. It comes with a USB to PS/2 adapter to run it with PS/2 port, by default this mouse runs with USB port. It has forward and back buttons that helps in browsing web and documents. Scroll wheel of Logitech LX7 can be use back forth and side to side. This mouse can be use with either left hand or right hand.
Now build a new gaming rig with my suggestions and brag about it to your friends that how cheap you build it.
On March 3rd 2009, Nvidia has officially renamed their GeForce 9800 GTX+ video card to GeForce GTS 250 and this is the first gpu of Nvidia’s GeForce GTS 200 series and another card that is said to come from this series is GTS 240 which is a rebranded 9800 GT, this series of cards are based on Nvidia’s 55nm G92b core, Nvidia is schedule to officially rename its G92-based graphics cards series.
It all started with 8800 GTS rebranded to 9800 GTX and 9800 GTX get an overclocked version which is 9800 GTX+ in which Nvidia upped the clocks by reducing the die from 65nm to 55nm and finally it gets the name of GeForce GTS 250. Nvidia’s GeForce 9800 GTX+ was released in July 2008 with a purpose to compete ATI’s Radeon HD 4850.
GeForce GTS 250 VS GeForce 9800 GTX+
I know the whole internet is full of why the hell is Nvidia bringing a gpu that is already in the market, yes, there is no difference in both 9800 GTX+ and GTS 250, but, GTS 250 has slight differences and the main difference is a new VBIOS, also Nvidia set the standard memory for GTS 250 to 1GB instead of 512MB and some of Nvidia partners are going to launch even 2GB memory version of this graphics card. Another difference is GTS 250 length, this card has a 9 inches long PCB instead of large 10.5 inches long PCB of 9800 GTX+. Another change is that GTS 250 requires only one PCI-Express power connector instead of two power connectors and runs at maximum TDP of 150W which is good for users with older power supplies that have only one PCI-E power connector. Beside this slight difference between GeForce GTS 250 and GeForce 9800 GTX+, both cards comes with same specs and features.
Nothing to get excited because GTS 250 is rebranded 9800 GTX+, 9800 GTX+ is an overclocked 9800 GTX and 9800 GTX is a rebranded 8800 GTS.
But still I will list specifications here, GPU clocks for this card are 738MHz and Stream Processors are running at 1836MHz, it has 128 Shader Processors and Texture Fill Rate is 47.2 billion/sec. Standard Memory configuration is 512MB or 1GB GDDR3 with a Memory Interface Width of 256-bit, Memory Clocks are at 1100MHz (2200MHz Effective) and Memory Bandwidth is 70.4GB/sec.
Some of the features of GeForce GTS 250
- NVIDIA® PureVideo® HD Technology
- Dual-stream Hardware Acceleration
- 3-way and 2-way NVIDIA SLI® Technology
- NVIDIA PhysX™ Technology
- NVIDIA CUDA™ Technology
- NVIDIA HybridPower™ Technology
- PCI Express 2.0 Support
A 1GB GeForce GTS 250 will cost you around US $149.99 and it’s 512MB version will cost you around US $129.99. Whereas a 512MB 9800 GTX card is available around US $149.99.
These video cards are said to arrive retail stores by March 10.
Nvidia high-end video cards, both single chip gpu GTX 285 and dual chip gpu GTX 295 with water cooling are reported to launch by two of the Nvidia partners.
Water Cooled GTX 285
EVGA is the first one to release a GTX 285 graphics card with water-cooling block installed on it. Though there is no design change in pcb they simply slap the water block on the card, despite the fact that it’s a reference designed video card it’s water cooling solution sure helps with better overclocking.
Clocks Of The Card
This card comes with core clock of 720MHz upped from 648MHz of reference and has 1GB of 512-bit GDDR3 memory which is clocked at an amazing 2770MHz which is default at 2484MHz and shader clock raised to 1,620MHz from 1476MHz. This card has 240 Processing Cores and at the moment it’s the best single chip gpu.
Water Cooled GTX 295
Now let’s move to dual chip gpu, here, BFG is the proud one to introduce a water cooled GTX 295. Alas it’s a reference designed pcb with default clocks, mean it’s not a factory overclocked card but a video card with a water cooling block from Danger Den installed on it, this water block covers GPU, RAM, voltage regulators, and I/O chip thus this graphics card works cooler than the one with Nvidia reference cooling solution, water cooling makes it a perfect choice if you like to overclock your card yourself, but still if you want a factory overclocked water cooled GTX 295 wait till the month of March, 2009.
Clocks Of The Card
Since it’s a reference card it’s both GPUs runs at 576MHz, it has total 1792MB (896MB x 2) of GDDR3 memory which is clocked at 1998MHz, shader clock is at 1242MHz and this video card comes with a total of 480 processing cores which is 240 processing cores for each GPU.
BFG has included two standard removable fittings, each for 3/8″ and 1/2″ inner diameter tubing as well as two micro removable fittings for “space constrained” Nvidia SLI setup, two tubing clams for 5/8″ and 3/4″ outer diameter tubing bundle with other water cooling accessories.
Availability and Price:
At the moment price and arrival of both of these cards is unknown, so, we should wait and see, you can expect to pay a hefty amount to purchase one of these cards.
Nvidia SLI support has finally arrive to Intel’s DX58SO motherboard codenamed Smackover, which is Intel’s manufactured motherboard with their X58 Express chipset. Last year Intel launched their Core i7 line of processors and along came this new motherboard from Intel to support the Core i7 CPU series, even though the chipset X58 supports Nvidia SLI which is a multi-GPU configuration, Intel didn’t implement it in their DX58SO motherboard. Morning of Feb-11-2009 Nvidia announced that Intel has given them license to bring their multi-gpu support for Intel’s DX58SO motherboard. So, from now on Intel Smackover will support Nvidia SLI even in Quad-SLI config on its dual PCI-E 2.0 x16 slots, you can use any (any means any, doesn’t have to be two same gpus) two GeForce GPUs for SLI configuration, for best performance in Quad SLI your best option is a pair of GeForce GTX 295. As most of you know that Intel’s dual cpu platform Skulltrail has an embedded Nvidia PCI Express controller to run SLI config whereas Intel DX58SO Smackover motherboard simply has an embedded key in motherboard bios from Nvidia and Forceware drivers will enable SLI once key is located from the motherboard bios.
So, for the first time in history you can enjoy the advantages of SLI, PhysX, CUDA and GeForce Stereoscopic 3D stereo all in an Intel platform, isn’t it exciting? best processor chipset and best graphics chipset in one place?.
Some Nvidia partners are reporting increased sales in last month than year 2008’s last quarter. This impressive change was the result of Nvidia’s dual gpu card GTX 295 and single gpu card GTX 285 release. Also Nvidia’s GTX 260 55nm card, 9600GT and 9500GT cards are selling well too, specially 9600GT and 9500GT 1GB versions are selling like crazy. Buyers prefer video cards with 1GB of memory instead of 512MB even though there is no performance difference at all and even if there is any advantage it’s not much noticeable.
But Nvidia isn’t stopping here, they have more plans and one of them is to rename their G92 series, which will rumoured to come next month on CeBIT 2009 trade show in Germany. First card to get a new name will be GeForce 9800 GTX+, it will renamed to GeForce GTS 250 and second card will be GeForce 9800 GT to get name GeForce GTS 240, you have been hearing about these mid-range Nvidia cards to get renamed, now next month you will probably see them, if the rumours are true. Though these cards are getting new names specifications of these graphics cards are all identical except for a new VBIOS.
I don’t get it, why re-release a video card that is already in the market? who would buy it? let’s hope they come with some improvements over GeForce 9800 GT and GeForce 9800GTX+ edition.